Which areas of application are possible?

The drive is basically designed for indoor use only, as well as for areas that meet similar requirements. The operator may only be installed inside or on the inside of buildings without additional safety measures. The operator has been designed exclusively for the automatic operation of sliding doors.

You can find the typical application areas Hier

What are the functions of the drive?

Standard functions: Full opening, partial opening, permanent opening, special input for special applications, lock / drive bolt limit switch for mechanical locking Special functions: Internal lock function, external lock function, motion detector, magnetic brake, potential equalization,

Which drive can be used for which door weight?

Door weight up to 150 kgS4000 Standard Version 

Door weight from 150 kg to 250 kg: S4000 SK-Version  

Door weight from 250 kg to 400 kg (Building construction): S4000 heavy duty version  

Door weight from 400 kg - on request

How is the drive mounted?

The actuator (except for low-energy variants) may only be installed by qualified personnel.

The basis for proper assembly is the obligatory instruction in our company. The training documents contain all necessary instructions for mounting

How is the drive put into operation?

The assembly work on the door and operator must be completed and the door leaf must be adjusted in height and lateral distances to ensure easy sliding by hand along the entire opening width.

If the door leaf is difficult to move, do not start the setup procedure.

A reference run is triggered for end position detection. During this run, keep body parts away from all moving parts, as the drive is only completely ready for operation after a successful reference run.
A warning signal sounds during the setup process. The door load is displayed with a bar graph or with a % indication on the notebook or smartphone.shows.

How often should maintenance be performed?

On the S4000, the yellow LED on the motor unit and/or terminal indicates that a safety check is due.

The testing interval is a maximum of 12 months.

In case of highly frequented passages or sensitive use, this maintenance interval must be shortened

According to DIN EN 18650-2, power-operated windows, doors and gates must be checked for their safe condition by an expert before they are put into operation for the first time and at least once a year.